|
If you are looking
to upgrade your brakes without paying an upgraded price, Galfer black pads
are the perfect choice for you. These GG rated pads out-perform most
original equipment pads (which are usually G-rated only) by maintaining
functionality at temperatures as high as 700 degrees. They offer extreme
versatility with the ability to be used on both front and rear, and on both
street and dirt with excellent effectiveness. These Semi-Metallic & Carbon
pads offer great longevity while limiting rotor wear. These pads will give
you a strong progressive feel allowing for a controlled braking modulation.
Composition:
Semi-Metallic, Carbon
Installation:
Clean rotor surface and bed-in with easy braking first 60-120 miles. |
|
If you need to stop
on a dime, you better put on the 'Green'. The Kevlar-organic Green pads
offer powerful, initial bite time after time with no fade. The versatility
of these pads is unmatched. They can adjust to abrupt temperature and
moisture changes and take little time to recover between braking. They can
be used in all types of riding whether it is street, dirt, race, and any
combination of each. These are better for an aggressive rider, since these
offer one or two finger stopping power. For many riders, the ideal
combination is using Galfer Green in the front with Galfer Black in the
rear.
Composition: Kevlar, Ceramics, Basalt
Fibers
Installation: Clean rotor surface (be
extra diligent in cleaning if following an HH (sintered compound) and bed-in
with easy braking first 60-120 miles. |
|
Galfer 1300 Series
Sintered Compound HH Pads
(HH
rated) |
|
Please Note:
Galfer brake pads are sold in a set of either 2
or 4 pads depending on the caliper on your bike. Order 1
brake pad set for each caliper you want to install them on. So if you have
a motorcycle with dual rotors, you would need to order 2 sets.
Notes on rating of pad friction: Pad Friction
levels are designated by the alphabet system. The further down the alphabet
the higher the friction level and double letters is stronger than single
letter designations (Example: HH has a stronger friction rating than GG and
GG has a stronger friction rating than G). |
|
These are the
hottest pads on the market. This sintered metal & ceramic composition allows
for the ultimate friction, making their stopping power unmatched. It will
provide instant powerful braking intensity in any weather condition or
speed. The ceramic coating on these pads disperses the heat evenly, keeping
the brake fluid temperature lower. This minimizes brake fade. These pads
also have a longer life span than most other pads because of the high
metallic content. These HH pads are rougher on rotor surfaces but work with
optimum performance on Galfer Brake Rotors and other high-carbon content
discs. Despite this assumption, these pads have remained popular with the
aggressive off-road and street riders and are supplied to many race teams.
Composition:
Sintered Metal, Advanced Ceramics, Carbon Fibers
Installation:
Clean rotor surface and bed-in with easy braking first 60-120 miles. |
|
