Hotbodies Racing's sleek Flush Mount LED Front Turn Signal Blinkers are designed for an aerodynamic edge. These unique custom designed blinkers fit neatly into the fairing pockets of the factory blinker stalks giving your bike the clean slippery look of speed.
Because Hotbodies Racing's sleek Flush Mount LED Front Turn Signal Blinkers are shaped for each model bike, their integrated finish accentuates the streamlined designs of the motorcycle. Hotbodies Racing's sleek Flush Mount LED Front Turn Signal Blinkers feature amber LED Lights behind your choice of lens color for an exacting edgeless fit.
- Industry leading design
- LEDs for trouble free maintenance
- Exclusive colored lenses
- Direct OEM replacement
-
Sold as a pair
Hotbodies Racing Flush Mount LED Front Blinker Common Questions:
1. Do Hotbodies Racing's LED flush mount
blinkers work with my stock running lights?
No, Hotbodies Racing turn signals only have two wires. One for the ground and
one for the turn signals, the extra wires from your wiring harness are for the
running lights and this should be tied off to the side because it is not used.
2. Do
I need resistors or load equalizers?
The turn signals are designed for the LED's to blink faster since they are
smaller than stock. This will help draw more attention from drivers behind you.
If you wish to slow them down, we recommend a 20-25 watt 8 ohm non-inductive
resistor wired inline with the RED wires on the signals. You can check with
Radio Shack or www.customled.com for pricing and availability.
3. I
have a 2007-2011 CBR600RR, after installing the LED blinkers, they are flashing so
fast that they look solid and will not flash, how do I fix this?
The CBR600RR is the only bike to do this. When you install the LED flush mounts
AND modify your rear signals to LED’s as well you will run into this problem.
The bike’s computer thinks that all your stock turn signals are blown out. To
fix this you will need to install resistors / load equalizers on all four
signals.
4. I
received a bunch of white washers with my signals, what are they used for?
The turn signals fit many different models and washers are supplied for the
customer who will need them. Customers with 07-11 CBR600RR's, 04-07 CBR1000RR’s,
03-09 YZF-R6’s and 07-08' YZF-R1’s will need these white washers to space the
signal out in between the fairing and the signal. This will give you a flush
look.
