Universal GP Clutch / Perch Lever by CRG
The CRG GP Cable
Clutch lever features 30mm / 26 mm / 22mm Pivot to Anchor Center positions
enabling the rider to find the right ratio for the given bike or conditions.
Serious Road Racers, Sport Street Riders, and
Supermotard Racers have searched for a cable clutch lever with the features to
address the demands of hardcore asphalt riding. Variable Leverage ratio allows
for a lighter or heavier clutch pull, and also allows for a tunable clutch
modulation. Top level riders are frequently adjusting clutch cable slack to
compensate for thermal and wear changes in the clutch system during racing and
riding situations. The CRG GP Cable Clutch features a large detent style
adjusting wheel to manually adjust the cable slack. Additionally, we have
innovated a unique “Racheting Thumb Pad” which allows for adjustment of cable
slack at a defined limit, 60 degrees of turn, per engagement. An added benefit
of the rachet pad is that the rider need not remove his hand from the grip in
order to adjust the cable slack.
The CRG GP Cable Clutch has infinitely adjustable
static positioning. By turning the “Micro Clicker Knob”, the optimal static
(open rest) position of the lever can be tuned in for rider preference depending
on variables of hand size, grip diameter, glove thickness, and hand fatigue.
Another high quality feature of the CRG GP Cable
Clutch is the ball bearing pivot. It is not the only clutch lever with ball
bearings, but CRG takes this element to a new benchmark. With two 16mm outer
diameter shell bearings, spaced in a wide clevis configuration, no other clutch
lever can offer a similar level of smooth action, while eliminating lateral slop
/ play.
The CRG GP Cable Clutch has two features which
address potential damage in a tip over condition. First, the lever has a outer
section and inner section which are connected via a folding hinge. The hinge in
held in its normal position utilizing a heavy load detent / ball / spring. When
hit at the lever tip, the lever is allowed to hinge away from a potentially
damaging blow. The lever can then be pushed back to its normal position, where
the ball / spring / detent clicks the lever back into its normal position.
Additionally, the lever is clamped to the handle bar with a Teflon sleeve
between handlebar and perch clamp. This feature allows the entire assembly to
turn on the handle bar should the lever or perch assembly be impacted in areas
other than the lever tip.
- 6061-T6 Aluminum CNC Machined Billet Construction
- Ball Bearing Pivot
- Folding Lever
- Teflon Sleeved
- Position Adjustable
- Variable Leverage Ratio
- Ball / Spring / Detent on-the-fly Large Cable Adjuster Wheel
- Red Anodized Ratcheting Cable Slack Adjuster
- Fits all 22mm diameter handle bars
