Introducing
SPEED BLEEDER,
the patented bleeder screw with the built-in check valve.
It is truly a
one-person bleeder screw. Once installed, it becomes a permanent part of the
brake system.
When it is time to bleed your brakes, you loosen the Speed Bleeder 1/4 turn and
pump your brake pedal. When the pedal is depressed the pressure generated opens
the check valve letting air and brake fluid out of the end of the Speed Bleeder.
When you release the pedal and it returns to the up position, the check valve
closes and prevents any air from reentering the system through the Speed
Bleeder.
When bubble free fluid is evident you close the Speed Bleeder. In the closed
position it works just like your stock bleeder screw and prevents any brake
fluid from leaking out. It generally takes about 5 pumps to purge each caliper
or wheel cylinder. That is all there is to bleeding your brakes. If at a later
date you need to bleed your brakes, the patented thread sealing system makes it
easy to open the bleeder screw to perform the bleeding operation. It is made of
quality materials and it is economical.
